R1336mzz (HFO-1336mzz, hexafluorobutene-2-butene, SF33, hexafluorobutene electronic fluorination liquid)
The chemical name of SF33 is hexafluorobutene. It is an environmentally friendly solvent and heat transfer agent product specially developed by Comus. It has the following characteristics:
1 Environmentally friendly, zero ODP, does not destroy the ozone layer; very low GWP value (9.4), low greenhouse effect
2 Boiling point is 33℃
3 Critical temperature is 171℃, freezing point is lower than-151℃
4 Good thermal stability, using temperature greater than 250℃
5 The material has good compatibility and is compatible with most plastics and rubbers
6 Good safety: non-toxic, colorless and odorless
7 No flash point, non-flammable
8 The latent heat of vaporization is large, and the latent heat value at the boiling point (33℃) is 164KJ/kg
Molecular weight 164
ODP 0
Boiling point, ℃ 33 GWP(CO2 100years) 9.4
Surface tension dye/cm 12.9 Organic volatiles VOC No
Liquid density 20C g/cm3 1.358 Flammability (ASTM 681) No
Freezing point C-151 AEL(8hours) 200ppm
Solubility in water, ppm 140
Water solubility, ppm 490
Critical temperature C 171.3
Critical pressure MPa 2.90
Latent heat of evaporation (boiling point) KJ/kg 164
Specific heat 20C KJ/kg C 1.17
Viscosity, cPs 0.34
Typical applications:
cleaning and washing
drying liquid
particulate matter removal
Carrier for fluorine lubricating oils
solvents and dispersion media
thermally conductive liquid
insulation fluid
Can replace a variety of fluorine liquids such as R141b, PFC, R113, etc.
Safety/flammability
SF33 is a non-flammable liquid and will not become a flammable substance during boiling and evaporation. They are also not flammable liquids in the open and closed NATT and DOT classifications. Its thermal stability is higher than that in the cup test and there is no flash point. At 250℃.
storage and disposal
R1336mzz has good thermal stability. It does not oxidize and will not degrade during storage. Store in a cool, clean and dry area. Prevent leaks and potential contamination.
The boiling point of R1336mzz is only 33 degrees, so the product should be stored at a low ambient temperature, below the boiling point, to avoid pressure on the packaging drum.
Packaging specifications:
23kg/barrel, 230kg/barrel.
The chemical name of SF33 is hexafluorobutene. It is an environmentally friendly solvent and heat transfer agent product specially developed by Comus. It has the following characteristics:
1 Environmentally friendly, zero ODP, does not destroy the ozone layer; very low GWP value (9.4), low greenhouse effect
2 Boiling point is 33℃
3 Critical temperature is 171℃, freezing point is lower than-151℃
4 Good thermal stability, using temperature greater than 250℃
5 The material has good compatibility and is compatible with most plastics and rubbers
6 Good safety: non-toxic, colorless and odorless
7 No flash point, non-flammable
8 The latent heat of vaporization is large, and the latent heat value at the boiling point (33℃) is 164KJ/kg
Molecular weight 164
ODP 0
Boiling point, ℃ 33 GWP(CO2 100years) 9.4
Surface tension dye/cm 12.9 Organic volatiles VOC No
Liquid density 20C g/cm3 1.358 Flammability (ASTM 681) No
Freezing point C-151 AEL(8hours) 200ppm
Solubility in water, ppm 140
Water solubility, ppm 490
Critical temperature C 171.3
Critical pressure MPa 2.90
Latent heat of evaporation (boiling point) KJ/kg 164
Specific heat 20C KJ/kg C 1.17
Viscosity, cPs 0.34
Typical applications:
cleaning and washing
drying liquid
particulate matter removal
Carrier for fluorine lubricating oils
solvents and dispersion media
thermally conductive liquid
insulation fluid
Can replace a variety of fluorine liquids such as R141b, PFC, R113, etc.
Safety/flammability
SF33 is a non-flammable liquid and will not become a flammable substance during boiling and evaporation. They are also not flammable liquids in the open and closed NATT and DOT classifications. Its thermal stability is higher than that in the cup test and there is no flash point. At 250℃.
storage and disposal
R1336mzz has good thermal stability. It does not oxidize and will not degrade during storage. Store in a cool, clean and dry area. Prevent leaks and potential contamination.
The boiling point of R1336mzz is only 33 degrees, so the product should be stored at a low ambient temperature, below the boiling point, to avoid pressure on the packaging drum.
Packaging specifications:
23kg/barrel, 230kg/barrel.
Ask Question About Product
Note: HTML is not translated!
